If you do not have SecureTeen on your PC, you can link the child profile during installation.
- If you already have an SecureTeen
login account, Press "Existing User" to login.
If you do not have SecureTeen login account, Press "New
User" (Figure 1)
Figure 1
- Create New SecureTeen
Account: Enter the required information, mentioned in
the figure below (Figure 2). Press
"Next"
Figure 2
Existing User Login: Enter
your SecureTeen username and credentials;
Press "Next" (Figure
3).
Figure 3
On successful
login; select a name for your device,
later on which will help you recognize your devices through
your SecureTeen account while monitoring
multiple devices. If you have any existing device against your
SecureTeen account, you can select one from list of already
registered devices. (Figure
4)
Figure 4
Now you need to choose your device linking type. There are two type of linking available for the SecureTeen account, Basic and Advance.
In Basic mode your all Machine
Users will be mapped to a single SecureTeen Profile. Default
profile will created automatically by administrator of
the SecureTeen Dashboard. As shown in
the Figure 5, Select first option and Press
"Next". Now will lead you to finish page
directly.
Figure 5
- In Advance
Mode you can create your SecureTeen profiles of
your own choice, new machine users can also be
created directly from the setup. You can link one or multiple
machine users against one SecureTeen
profile.
Figure 6
- Map machine users to
SecureTeen profiles. Drop down menu will list the name of
SecureTeen profiles. Default profile is already created, you
can create a new SecureTeen profile by clicking "Create
Profile" as shown Figure
7.
Figure 7
- Create New SecureTeen profile (Optional). (Figure
8)
Figure 8
- Create New Machine User (Optional). (Figure
9)
Figure 9
- Now Map Machine Users to SecureTeen Profile. We are mapping
John,test2 & test3 with New SecureTeen profile and rest with
the default as shown in Figure 10. Press
"Next".
Figure 10
- When you will click
"Next", setup will prompt a message box. This
message box is warning you that all the previous mapping
setting will be discarded and new mapping settings will be
activated. (Figure 11)
Figure 11
- Finish Screen will be appear. Press "Finish".
(Figure 12)
Figure 12
Jason
Comments